Programmable DC power supply High power DC power supply is used for battery discharge test. By setting appropriate load resistance, constant current discharge test can be performed. Here, if the load resistance value is set too low, the reverse voltage will be applied to the DC stable supply and no constant discharge will be possible.

When assembling HVDC power supply wire kits in many workshops, sometimes they don't pay much attention to it. This allows the high voltage DC power supply to be deployed unexpectedly during use, leaving the wires exposed. Such high-voltage DC power supplies are also very prone to failure. Then imagine, if you want to repair a machine, when you open the outer packing board and see a mess of wires, you must want to send the machine straight away, do not want to repair it. This is the function of the high voltage DC power supply wire kit.

ABC three-phase induced current and ABC three-phase capacitor current values are displayed directly on the control panel, and the resonant point symptoms are displayed directly on the panel.

Digital trigger different from analog trigger, DC and AC power supply digital trigger data directly using ADC sampling data. Therefore, the sampling and triggering units process the same data.

Three-phase adjustable AC load bank In many industries, the backup power supply is often compared to the heart of the power system. Maintenance management departments at all levels shall ensure the operation quality of equipment, production safety and property safety.

As a system for circuit evaluation of CT embedded devices, we propose to combine a stable AC power supply with an AC electronic load device.

Dc power supply of electromagnetic interference is the local switching circuit of transformer is the most serious in primary and secondary coil, but its radiation and conduction interference can produce.

Programmable AC power supply in order not to form overcurrent short interruption conditions under voltage and current waveform. A short interruption of 10ms occurred at a 90 degree phase Angle at 50Hz.

There are many types of DC power supply. Different types of dc power supply have different properties of non-static power and different energy conversion processes. In chemical cells (such as batteries, batteries, etc.),

The selection of electronic load should pay attention to several key points.1. Select voltage, current, power, accuracy and resolution according to the actual test source (power supply, battery, charging pile) demand.